ACS712ELCTR-05B-T

The ACS712ELCTR-05B-T is an Allegro MicroSystems ACS712 fully integrated, Hall-effect-based linear current sensor IC with a ±5 A range, in an 8-pin SOIC package. The device consists of a precise, low-offset linear Hall circuit with a copper conduction path located near the surface of the die, so the current flows through a low-resistance internal conductor and the resulting magnetic field is sensed by the Hall IC and converted into a proportional voltage. The chopper-stabilized BiCMOS circuit is programmed for accuracy after packaging, which gives a low offset, a nearly zero magnetic hysteresis and a stable output over temperature, and the device provides a total output error of about 1.5 percent at 25 °C. The 05B version offers a sensitivity of 185 mV/A, the highest of the family, so it gives the best resolution for a small current. It provides 2.4 kVRMS isolation between the current path and the signal path, an internal conductor resistance of about 1.2 mOhm to minimize power loss, a bandwidth up to 80 kHz and a 5 V single supply operation with a ratiometric output, over a -40 °C to +85 °C range. Typical uses include motor control, load detection, switched-mode power supplies and overcurrent protection. Every sensor BeiLuo ships is factory-traceable and includes an import declaration, a certificate of origin and a RoHS compliance file. Our FAE team helps you choose the range and plan the isolation and layout.